Flexographic Flexo Photopolymer Plate
1)Excellent dot and isolated line reproduction
2)Solid printing performance
3)High latitude of exposure and processing
4)Good ink transfer
|Recommend relief depth(mm)||2.2-3.0||2.2-3.0||2.0-3.0|
|Maximum line line/inch||85||85||85|
|Minimum isolated line||0.3mm (0.0118inch)||0.3mm (0.0118inch)||0.3mm (0.0118inch)|
|Minimum isolated dot||0.50mm (0.0197inch)||0.50mm (0.0197inch)||0.50mm (0.0197inch)|
|Suitable ink||Suitable for water and alcohol-based ink, incompatible with oil-based ink, hydrocarbon solvent or the ink containing ethyl acetate of more than 25%|
|Mainly applicable field||Corrugated board||Corrugated board||Corrugated board, thick board|
|Minimum drying time(hours)||3-4|
1) Platemaking conditions: light of 80 watts (9.7mW/cm2 under 365nm), platesetter temperature 24-30 °C.
2) All the above data is depended on our plate-making device. Due to the different requirements of plate-making device, UV lamp power, relief depth and print image, the above recommended time can be changed appropriately. Customers should test on their own device for optimum plate quality.
5-Dimension & Packing
|1270mm×2032mm (50"×80")||--||--||√ |
6-Storage & Guarantee
Unexposed plates should be stored in cool areas (4-32°C)away from heat. The plates must be placed flatly, and protected from contacting UV light. It is recommended to unpacked and handled in yellow light.
Printing plate should be avoid excessive white light, irradiating from sunlight and exposing in high concentrated ozone environments for a long time either. After being unloaded, the plates should be cleaned thoroughly.
Under the recommended storage condition, guarantee period of Flexographic Printing Plate is 24 months.
7-How to place an order
|1-Please kindly send us your professional inquiry.|
|2-We send you our professional quotation with price, packing, technique data and company information.|
|3-Confirming the price, lead time, payment or some artwork.|
|4-We will send some samples for your test if you want.|
|5-When quality is approved, clients confirm quantity, then we make commercial invoice.|
|6-Clients pay the deposit and send us the bank receipt.|
|7-Start production according to clients' requirement.|
|8-Communicate with clients about the progress of production.|
|9-We take photos when production finished, clients pay the balance by T/T or by L/C.|
|10-Order can be say "finish" when you receive the goods and satisfy with them .|
|11- Feedback to Freedom about Quality,Service, Market Feedback & Suggestion. And we can do better.|
Please feel free to contact me online or send me a message if you are interested in our products, thank you!vvv